All in one reusable resin river table mold for making standard sized coffee tables / hall tables / charcuterie boards or customise your own creations.
1200mm x 600mm x 70mm internal dimensions.
These reusable molds are designed and made in Melbourne, machine-cut from a specialist mix of plastics. Epoxy resin does not adhere to this material therefore eliminates the need for taping or release spray.
Each ResinBuddy comes assembled and sealed ready for your first pour. Once your pour is complete and cured, simply unclip and unscrew either one or both ends remove your table with chisels or paint scrapers (something to wedge in between the table and mold). Then peel off the old silicone from the end you have removed only, reseal with the silicone provided (or any waterproof silicone) and place the end panels back on. Your mold will be ready to use in a few hours once the silicone is cured.
Each Coffee Buddy comes with x3 dividers to customise the internal dimensions and extra blocks to secure your wood underneath the clamping brackets, use these to avoid the wood floating in the resin while curing.
- Aluminium T-Track
- T-Track hardware
- Tube of waterproof silicone.
- Clamping Brackets.
- 1x 1200x70x20 divider.
- 2x 290x70x20 dividers.
- Levelling Feet.
- Surface Level.
- Extra blocks for securing the clamps to your board.
- Easy release latches on each end panel and two screws with threaded inserts each end.
These molds are designed to make setting up and resetting for your next pour as quick and efficient as possible to minimise waste and save time. It is not intended to produce a finished product. All blanks will need to be cut and sanded after removing from the ResinBuddy mold.
There can/will be minor manufacturing marks/scratches on the surface of the HDPE. These marks will be seen on your resin blank but will be planed and/or sanded when finishing your final product.
For more info please email firstname.lastname@example.org