Skip to product information
1 of 8

ResinBuddy

CharcuterieBuddy

CharcuterieBuddy

Regular price $450.00 AUD
Regular price Sale price $450.00 AUD
Sale Sold out
Shipping calculated at checkout.

GST Included in price!

No more mess. No more fiddling around. Just a clean, crisp blank canvas to unleash your creativity upon. An all-in-one, Australian-made reusable charcuterie board mold that will take your craftsmanship as well as your inspiration to the next level.

 

Get ready to impress. Your mold comes sealed, assembled and ready for your first pour. Create your next custom charcuterie board masterpiece with ease.

 

600mm x 30mm x 50mm internal dimensions.

 

Molds are designed and made in Melbourne, machine-cut from a specialist mix of plastics that eliminate the need for taping or release spray, phew! No need to level your table, the inbuilt levelling feet and level enable you to control your environment for the best results.

 

Bring your vision to life in 4 simple steps:

  1. Place your CharcuterieBuddy on a table, put the clamping bracket with the inbuilt level inside your mold and adjust the feet to ensure a level surface.
  2. Clamp and pour, all features provided including extra blocks to secure your wood underneath the clamping brackets (avoid your wood floating while resin cures)
  3. Once your pour is complete and cured, simply unclip and unscrew either one or both ends
  4. Remove your table by sliding a chisel or paint scraper between the table and mold and leveraging and popping it out.
  5. Peel off the old silicone from the end you have removed only, reseal with the silicone provided (or any waterproof silicone) and place the end panels back on. Your mold will be ready to use in a few hours once the silicone is cured.

 

Features:

  • Aluminium T-Track
  • T-Track hardware
  • Tube of waterproof silicone.
  • Clamping Brackets.
  • Levelling Feet.
  • Surface Level.
  • Extra blocks for securing the clamps to your board.
  • Easy release latches on each end panel with threaded inserts each end.

 

 

These molds are designed to make setting up and resetting for your next pour as quick and efficient as possible to minimise waste and save time. It is not intended to produce a finished product. All blanks will need to be cut and sanded after removing from the ResinBuddy mold.

There can/will be minor manufacturing marks/scratches on the surface of the plastic. These marks will be seen on your resin blank but will be planed and/or sanded when finishing your final product. 

For more info please email resinbuddy@gmail.com

Materials

Specialist mix of plastics that epoxy resin doesn't bond to.

Aluminium

High Quality steel screws and latches

Shipping & Returns

Free Shipping to WA, VIC, SA, ACT, NSW, QLD, TAS (contact us about NT for special rates)

Care Instructions

Clean out any residue after each pour with isopropyl alcohol spray to avoid any stickiness.

View full details
  • Free Shipping

    Free hipping to mosts states Australia wide (excluding NT) Contact us for more info