All-in-one reusable and fully detachable resin river mold for making Charcuterie Boards / Serving Platters.
610mm x 300mm x 50mm internal dimensions.
These reusable molds are designed in Melbourne and machine cut from a specialist mix of plastics, epoxy resin does not adhere to this material therefore eliminates the need for taping or release spray.
Each ResinBuddy comes assembled and sealed ready for your first pour. Once your pour is complete and cured simply unclip and unscrew the front panel and remove your board with a chisel or paint scraper (something to wedge in between). Peel off the old silicone from the front panel only, reseal with the silicone provided (or any waterproof silicone) and place the front panel back on. Ready to use in a few hours once the silicone is cured.
Each ResinBuddy comes with extra blocks to secure your wood underneath the clamping brackets, use these to avoid the wood floating in the resin while curing.
- Aluminium T-Track.
- T-Track hardware.
- Tube of waterproof silicone.
- Levelling Feet.
- Surface Level.
- Extra blocks for securing the clamps to your board.
- Easy release latches on either side of the front panel and one screw with threaded insert.
- Instructional booklet.
These molds are designed to make setting up and resetting for your next pour as quick and efficient as possible to minimise waste and save time. It is not intended to produce a finished product. All blanks will need to be cut and sanded after removing from the ResinBuddy mold.
There can/will be minor manufacturing marks/scratches on the surface of the HDPE. These marks will be seen on your resin blank but will be planed and/or sanded when finishing your final product.
For more info please email email@example.com